HOW TO USE

Usage

Properly prepared interior walls and ceilings including previously painted and primed plaster, wood, brick, drywall, cement, and metal.

Prep

Thoroughly clean the surface and allow it to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar Perfect White paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily stained areas, use a coat of Valspar® Interior Multi-Purpose Primer-Sealer for optimal color accuracy and coverage. Drywall and Plaster: Fill cracks, pits, and voids with a patching compound. Allow new plaster to fully cure and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar Perfect White paint.Wood: Sand wood smooth and patch holes and imperfections with wood filler or putty and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar Perfect White paint.Metal: Prime bare metal surfaces with Valspar® AntiRust Primer.

Application

Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium quality roller, polyester brush, or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from the dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.

Dry Time

Dry Time @ 77 °F and 50 % Relative Humidity

To The Touch: 30 minute – 60 minute

Recoat: 2 hour - 4 hour

Clean-up & Disposal

Clean up with warm, soapy water