Valspar-Signature® Interior Paint & Primer
Enter your offer details
Available In Stock
- ScuffShield™ Technology - resists scuffs and stains
- High-hiding Paint + Primer
- Stands up to Anything™
- Stand-out Color – rich and fade resistant
- Stand-up Finish – smooth/ high hiding coverage
- Fade and mildew resistant finish
- 100% acrylic latex
- Lifetime warranty
How To Use
This Paint Is Ideal For Use On Walls, Ceilings, And Trim. It Applies Easily To Properly Prepared And Primed Plaster, Wallboard, Wood, Brick, Masonry, And Metal.
Thoroughly Clean The Surface And Allow It To Dry. Remove Wallpaper And Loose, Peeling Paint. Remove Gloss From Shiny Surfaces. Patch Cracks And Spot Prime. Valspar Signature® Paint Can Be Used To Prime Patched Areas And Bare Surfaces Before Applying The Finish Coat. For Best Results On Heavily Stained Areas, Drastic Color Changes Or Deep, Vivid Colors, Prime With Valspar® Interior Multi-Purpose Primersealer For Optimal Color Accuracy And Coverage.
Stir Paint Thoroughly. Intermix Containers To Ensure Uniform Color. Apply With A Premium-Quality Roller, Polyester Brush, Or Airless Sprayer. Paint The Ceiling First, Then The Walls. If Applying By Roller, Roll From The Dry Area Into Wet Area Using Firm, Crisscross Strokes. Finish With Long, Even Strokes In One Direction. Note: Some Deep Or Bright Colors May Require An Additional Coat To Obtain Complete Hide. Surface Conditions And Application Technique Can Also Impact Coverage.
Dry Time @ 77 °F And 50 % Relative Humidity
To The Touch: 30 Minute – 60 Minute
Recoat: 2 Hour
Clean-Up & Disposal
Clean Up With Warm, Soapy Water.
Ratings & Reviews with pictures
- choosing a selection results in a full page refresh