Valspar Seasonplus® Exterior Paint & Primer
Available In Stock
- Complete color defense™
- Fade-Resistant Paint + Primer
- Excellent hide and coverage
- Extra protection from cracking/ peeling and blistering
- Provides a mold- and mildew-resistant coating
- Low-temp application
HOW TO USE
Properly prepared exterior surfaces of wood, hardboard, aluminum siding, vinyl siding, masonry, brick, stucco, cement composition panels, and metal. Not for use on floors.
Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Scrape and sand peeled or damaged paint to a sound surface. Sand glossy surfaces dull. Seal stains from water, smoke, ink, pencil, grease, etc. with the appropriate primer/sealer. Caulk around windows, doors, and other openings after spot priming bare surfaces with SeasonPLUS™ Exterior Paint + Primer.
Stir paint thoroughly. Intermix containers for uniformity. When the air temperature is 35°F, substrates may be colder; prior to painting, check to be sure the air, surface, and material temperatures are above 35°F and at least 5°F above the dew point. Avoid using if rain or snow is expected within 2-3 hours. Do not apply when air or surface temperatures may drop below 35°F within 48 hours. On large expanses of metal siding, the air, surface, and material temperatures must be 50°F or higher. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding. Always paint back into freshly painted areas and end up at a door, window, or outer edge. Move windows after 1 hour to prevent sticking.
Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 1 hour – 2 hour
Recoat: 1 hour
Clean-up & Disposal
Clean up with warm, soapy water.
Ratings & Reviews with pictures
- choosing a selection results in a full page refresh