Valspar® Duramax® Exterior Paint & Primer
Available In Stock
- Maximum weather protection
- High-Hiding Paint + Primer
- FlexShield365™ Technology – Year-round resistance to cracking and peeling
- Remarkable coverage
- Mold/ mildew & algae-resistant finish
- Low-temp application
- Excellent hiding
- Flexible finish won’t crack or peel
- Excellent fade resistance
HOW TO USE
Use Valspar Duramax Exterior Paint on properly prepared exterior wood and metal siding and trim including hardboard, fiber cement board, vinyl, primed metal, shakes, brick, cement, cinder block, and stucco. Do not use on glazed brick, floors, or steps.
Thoroughly clean the surface and allow it to dry. Remove all dirt, dust, chalk, rust, grease, wax, and mildew.
Stir thoroughly and intermix multiple containers. Apply only when paint, surface, and air temperatures are 35–90 °F (7–32 °C) during application and drying time. Do not paint if temperatures are expected to be below 35 °F (7 °C) within 48 hours of application or when heavy dew or precipitation is expected in the next 12 hours. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding. Always paint back into freshly painted areas and end up at a door, window, or outer edge. Move windows after 1 hour to prevent sticking.
Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 1 hour – 1 hour
Recoat: 4 hour - 4 hour
Clean-up & Disposal
Clean up with warm, soapy water. Do not freeze. Keep container closed when not in use. Do not transfer contents to other containers for storage or disposal. In case of spills, absorb with an inert material such as sand or kitty litter. Dispose of an empty container or unused portion in accordance with local, state, and federal regulations.
Ratings & Reviews with pictures
- choosing a selection results in a full page refresh