Valspar® Door & Trim Oil Enriched Enamel

Valspar® Door & Trim Oil Enriched Enamel



    Enter your offer details


    Available In Stock


    • Durable oil-enriched enamel
    • Anti-fade formula
    • Resists scuffs and scratches
    • Soap and water cleanup
    • No sanding or priming needed


    Semi Gloss
    10 Gallon / 20 Gallon
    100 ft²/quart




    Ideal for Wood, Metal, and Laminate surfaces


    General: Read the Lead Warning paragraph. Remove rust, oil, grease, mildew salt, and dirt from the surface. Remove all dust or other loose material off the surface. Verify area is dry and free of all dust and loose material. Previously Painted Surfaces: Follow the General prep section. Glossy surfaces should be dulled. If the substrate is showing prime with appropriate Valspar primer. Steel: Solvent clean all surfaces per SSPC-SP 1. SSPCSP 2, Hand Tool Cleaning is the MINIMUM pre-required. SSPC-SP 6/NACE NO. 3, Commercial Blast Cleaning is PREFERRED. Galvanized: All new galvanized metal must be allowed to weather for a minimum of six months before coating. SSPC-SP 1 Solvent Cleaning is the MINIMUM prep requires. SSPC-SP 16, Brush-off Blast Cleaning of Non-Ferrous Metals is PREFERRED. Drywall: Fill cracks, pits, and voids with patching compound, let cure, and sand smooth. Remove all sanding dust. Spot prime new or bare surfaces before applying the finish coat.Wood: The surface must be in sound condition and free from all dirt, oils, and other contaminants. Solvent cleaner or other detergents might be required. Remove all loose wood by sanding as required.


    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply only when paint, surface, and air temperatures are 50–90 °F (10–32 °C) during application and drying time. Brush: Use a premium-quality natural bristle brush. Roller: 3/8–3/4 inch nap, premium-quality synthetic cover. Airless spray: 2000 PSI, 0.011–0.015"" tip. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding.

    Dry Time

    Dry Time @ 77 °F and 50 % Relative Humidity

    To The Touch: 1 hour – 2 hour

    Recoat: 4 hour - 4 hour

    Clean-up & Disposal

    Cleanup with soap and water

    Ratings & Reviews with pictures

    WE DON'T STOP 24/7

    support Call us today at (415) 212-5211 or email us at