Rabbet Router Bit

In order to create a rabbet joint, rabbeting bits are intended to create an L-shaped shoulder or dado (a square groove that goes against the grain) on the edge of a piece of material. This happens during the building of cabinets to create drawers, cabinet backs, and to link the tops of cabinets to the sides of cabinets. The most precise tool you have at your disposal to close in on a flawless fit is probably a rabbet plane. As its name suggests, a rabbet plane was made to construct or modify rabbets. The iron, or blade, of rabbet planes extends all the way to the sides of the plane body, which makes them special. Ratchet Joints compared to butt joints, increases glue surface area (adding strength) contributes to the alignment and support of the two pieces to be joined. Can deal with the forces and stresses of being opened and closed.

Detailed Information

 

• 1/4 Inch Shank Rabbet Router Bit, Overall Diameter: 1-3/8"; Cutting Height: 1/2".
• 6 bearings to cut rabbets of different depths, inner diameter: 3/16", outer diameter: 1/8", 1/4", 5/16", 3/8", 7/16", 1/2".
• Solid Hardened Steel Bodies with Anti-Kickback design. Heat resistant coating prevents build-up of sawdust, resin and pitch.
• Use on hand-held and table-mounted portable routers.
• Suitable for MDF, solid wood, particle board, plywood, etc.

 

Packaging and Delivery

 

Price per Quantity= $10.90

1 Quantity= 1 Item

Minimum order value=200

Cost of minimum order= $2180

Product Specification

 

• Material: Available in all types of materials.
• 1/2 “shank * 2” diameter * 1” cutter height.
• Cutting width (rabbets) : 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 11/16", 3/4", 6mm, 9mm, 12mm, 15mm, 18mm.
• Application/usage: used primarily with portable routers, can be used with various bearings to produce a wide range of cut depths.
• Shank size: 1/4 “ and 1/2 “
• Cutting Depth: 12 to 25mm
• Number of teeths : 4
• Shank : 8mm to 12mm
• Cutting Thick : 3mm to 38mm
• Can be customized in any material, sizes, length and Diameter as required by custom