Behr - Premium Plus® Interior Flat
Enter your offer details
Available In Stock
- For a classic scrubbable finish in low-traffic areas like living rooms and bedrooms. choose BEHR PREMIUM PLUS Interior Flat paint. This traditional flat sheen creates an all-purpose finish that covers and touches up easily and its non-reflective finish also makes it perfect for ceilings.
A flat sheen has a matte, non-reflective finish that’s easy to clean, touches up well and will also hide minor surface imperfections.
Best for use in
Low-traffic areas; Interior walls and ceilings
250-400 Sq. Ft. per Gallon
For low traffic areas. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, and Ceilings.
All surfaces should be properly prepared and cleaned.
Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
Remove mildew stains with a mildew stain-removing product.
Scuff sand glossy surfaces and repair imperfections.
Remove all dust with a damp cloth, allow to dry.
Allow new stucco, plaster, and masonry to cure for 30 days before painting.
Use BEHR PREMIUM PLUS® Paint as a primer over properly prepared coated or uncoated surfaces.
For stain-blocking, or over oil-based or glossy surfaces, use a product such as BEHR® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer No. 75.
For optimal color development, better hide, and to reduce the number of topcoats with deep colors denoted with a dagger (†) on the color chip, apply a custom tinted primer coat of BEHR PREMIUM PLUS Paint.
Prime all metal surfaces before painting.
Apply when air and surface temperatures are between 50-90°F (10-32°C).
Stir paint occasionally. Intermix containers of the same product to ensure color and sheen uniformity.
Use a high-quality 3/8-1/2" nap roller cover, nylon/polyester brush, or airless sprayer (.015-.019" spray tip, 60 mesh filter).
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Certain colors may require additional coats for complete hide.
Darker colors may require additional dry time between coats.
Cooler temperatures or higher humidity may prolong drying time.
After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant.
Do not use on floors.
For disposal of empty containers, unused paint, and soiled rags, contact your household refuse collection service.
Ratings & Reviews with pictures
- choosing a selection results in a full page refresh