Valspar The Perfect White® Interior
Available In Stock
- Paint + primer
- Our cleanest/ purest white
- Superior durability
- Quality finish
- Excellent hide in fewer coats
- Stain resistant and scrubbable
- Gives mildew-resistant finish
- 100% acrylic latex
- Lifetime warranty
HOW TO USE
Properly prepared interior walls and ceilings including previously painted and primed plaster, wood, brick, drywall, cement, and metal.
Thoroughly clean the surface and allow it to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar Perfect White paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily stained areas, use a coat of Valspar® Interior Multi-Purpose Primer-Sealer for optimal color accuracy and coverage. Drywall and Plaster: Fill cracks, pits, and voids with a patching compound. Allow new plaster to fully cure and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar Perfect White paint.Wood: Sand wood smooth and patch holes and imperfections with wood filler or putty and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar Perfect White paint.Metal: Prime bare metal surfaces with Valspar® AntiRust Primer.
Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium quality roller, polyester brush, or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from the dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 30 minute – 60 minute
Recoat: 2 hour - 4 hour
Clean-up & Disposal
Clean up with warm, soapy water
Ratings & Reviews with pictures
- choosing a selection results in a full page refresh